HOME PAGE

New Items

'LEADING THE WAY IN TRACK DEVELOPMENT'

Track gauge in waterjet cut 3mm aluminium

for:-

Gauge 1"Fine"

Gauge 1"Standard"

and Gauge 3

New for G3 is ready made & painted Station Lamps with working 12 volt grain of wheat bulb.

193mm high (168mm to baseboard line) x 30mm wide.

Made in cast resin around a brass bulb tube with brass baseboard retaining nut.

Available in Black or Green.
Track fixing escutcheon pins are now available for the "Fine" G1 track. These are 19 gauge x 10 mm long and are made in steel plated brass. Packed in 100's.

Track fixing escutcheon pins for "Standard" G1 track. These are 18 gauge x 13mm long in both solid and steel plated brass.  Packed in 100's.

G3 Crossover with 25 degree angle which is ideal to go with the 4500mm radius turnout.

Available in the code 250 stainless rail and dark chocolate brown A.B.S. plastic sleepers.

This is nice, Gauge 3 now have their own lost wax Tiebar and Machined Blades.

Available in Brass or nickel Silver.

 

Nice for Gauge 1, is the new "Fine" Frog Unit. Unlike the Standard Scale version, the rails slide into the check chairs.

The frog area is filled to 2mm, so is suitable for both 'Fine' and 'Course' scale wheel tyres.

Available in Brass or nickel Silver.

New charger unit for loco's. On a first come first served basis, I have a limited supply of super quality 10 to 20 cell fully automatic chargers. Output 41 volt, fast charge at 1.8 amp, top off charge at 250ma then a 60ma trickle charge.

Fitted with a 2.1mm charge plug.

These are made in Norway and not China, and are very good quality.

 
The 4MT loco now has a nice presentation box available. With lift out end and loco ramp.
A new low profile 45mm diameter Mylar Speaker for use with the Sound Card.

HOME PAGE